You can add up to 50 wireless devices. This feature keeps port from being scanned by devices outside of your local network. You can set up to ten 10 access policies. You can set up to four 4 URLs. You can block up to four 4 keywords. The LED lights up when the router is connected to a device through the corresponding port.
If the LED is flashing, the router is sending or receiving data over that port. If the LED is flashing, the router is sending or receiving data over the wireless network. It lights up amber if there is an error during process. This means that the router loses its settings whenever power is disconnected from the device. For instructions, click here. The default starting IP Address is You can set up to 20 static routes. It can be used with the following: Netscape 4.
The router has no SES capability. An SRX type wireless adapter will only operate at regular To optimize the Related Articles:. Belkin International, Inc. Software does not include any Open Source Software as defined below. As part of this license, you may A operate the Software in the manner described in the user documentation for the Software; B where the Software is provided for download onto a personal computer or mobile device, make as many copies of the Software as you reasonably need for your own use this does not include firmware ; and C permanently transfer all of your rights to use the Product including but not limited to the Software to another person, so long as that person also agrees to be bound by this Agreement, and following such transfer you stop using the Product and the Software.
The Software is made available to you on the basis of a limited license only as set out in this Agreement. You have the non-exclusive right to use the Software in accordance with this Agreement. All rights not expressly granted to you by Belkin under this Agreement are hereby reserved by Belkin. You will not acquire such rights, whether through estoppel, implication, or otherwise. If you have downloaded the Software from an App Store, you are also subject to any terms of use of that App Store.
Such terms of use may prohibit you from doing some of the things you are permitted to do under this Agreement or permit you to do some of the things you are prohibited from doing under this Agreement.
Notwithstanding anything to the contrary in this Agreement, by using the Software, you acknowledge and agree that it is solely your responsibility to understand the terms of this Agreement, as well as the terms of use of any App Store that may be relevant to the Software or the Product.
While Belkin is not required to do so, Belkin may provide you with upgrades or updates to this Software. Some Products include an auto-update feature, which gives us the ability to make updates automatically.
You can change auto-update options by changing your settings within the Product account information. In very limited cases, updates may still be automatically applied, regardless of the auto-update setting. For example, we may provide an automatic update that fixes a security breach or vulnerability to your network.
We may also provide you with updated Software data files automatically to benefit you, such as to provide you with updated device information to identify new devices in your network. These data files do not update your firmware but consist of Software files that are cached on your Product and override older files.
By agreeing to this Agreement, you agree to automatic updates. Belkin is committed to protecting your privacy. Our privacy practices are described in the Privacy Policy, as well as in separate notices given when an app, product or service is purchased or downloaded. At all times your information will be treated in accordance with the Belkin Privacy Policy, which is incorporated by reference into this Agreement and can be viewed here. You hereby acknowledge that the Software may contain Open Source Software.
This license does not apply to Open Source Software contained in the Software. Rather, the terms and conditions in the applicable Open Source Software license shall apply to the Open Source Software. Nothing in this Agreement limits your rights under, or grants you rights that supersede, any Open Source Software license.
You acknowledge that the Open Source Software license is solely between you and the applicable licensor of the Open Source Software. You shall comply with the terms of all applicable Open Source Software licenses, if any. Belkin is not obligated to provide any maintenance or support for the Open Source Software or any Product Software that has been modified by you pursuant to an Open Source Software license.
Open source licenses are generally licenses that make source code available for free modification and distribution, but can also apply to technology received and distributed solely in object code form.
All title and intellectual property rights including without limitation all copyrights, patents, trade secret rights and trademark rights in and to the Software including but not limited to any content incorporated into the Software , the accompanying printed materials, and any copies of the Software, are owned by Belkin or its suppliers.
Therefore, you must treat the Software like any other material protected by laws and treaties relating to international property rights and in accordance with this Agreement. These features are provided solely as a convenience to you. You will need to make your own independent judgment regarding your interaction with any Linked Sites. You hereby waive and release any legal claim you might have against Belkin with respect to these sites or third-party products or services, and your use of these sites, third-party products or services.
Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. Recurso Sitio web Linksys www. Todos los derechos reservados. Otras marcas y nombres de productos son marcas comerciales o marcas registradas de sus respectivos propietarios. Espere a que la luz se apague y vuelva a intentarlo.
El router admite las sesiones de una en una. Si parpadea, esto indica que existe actividad de red en el puerto de Internet. La primera es colocarlo horizontalmente en una superficie.
La segunda es montarlo en una pared. La distancia entre las ranuras es de mm 6 pulgadas. Se necesitan dos tornillos para montar el router. Taladre dos orificios en la pared. Introduzca un tornillo en cada orificio y deje que 3. Coloque el router de tal manera que las ranuras para 4. Coloque las ranuras para el montaje en pared sobre los 5.
Desactive el intercambio de archivos de igual a igual. Puede acceder a la utilidad mediante un explorador web en un equipo conectado al router. Deje el campo Usuario en blanco. Haga clic en Aceptar para continuar.
El valor predeterminado es de 30 segundos. Puede que deba consultar al ISP si el servicio de Internet de banda ancha se ha configurado con un nombre de host y de dominio. Este valor debe estar en el intervalo de a El router se puede utilizar como servidor DHCP para la red.
Si desea eliminar un cliente de la lista, haga clic en Remove Eliminar. Para salir de esta pantalla, haga clic en Close Cerrar.
El valor predeterminado es De lo contrario, deje los campos en blanco. Para desactivar los comodines, mantenga el valor predeterminado, Disabled Desactivado.
Para activar comodines, seleccione Enabled Activado. En el modo de funcionamiento puede seleccionar los tipos de funciones avanzadas que utilice. Si existe otro router en la red, seleccione Disabled Desactivado.
Haga clic en Close Cerrar para salir de esta pantalla. Para mayor seguridad, debe cambiar el SSID predeterminado linksys por otro. Una vez que el dispositivo cliente se haya configurado, 3. Haga clic en 2. Register Registro. Una vez que el dispositivo cliente se haya configurado, haga 3. Una vez que el dispositivo cliente se haya configurado, haga 2.
De lo contrario, seleccione Disabled Desactivado. Este valor indica el intervalo de frecuencia de la baliza. El valor predeterminado es 1. El valor del umbral RTS debe permanecer en su valor predeterminado de Para activar una directiva, seleccione Enabled Activada.
Para eliminar una directiva, haga clic en Delete Eliminar. Para crear una directiva, siga los pasos del 1 al Repita estos pasos para crear directivas adicionales de una en una. Access Policy Directiva de acceso. Introduzca un nombre de directiva en el campo 2. Para activar esta directiva, seleccione 3. Enabled Activada. Haga clic en 4. Next is the Wide Channel. Wireless Channel Picking a WiFi channel is not always a simple task. To configure the WiFi settings, click the option of Wireless at the top of the page.
Hard reset instructions for Linksys WRTN v3 If your WRTN v3 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Disable UPnP as there are kanual with this feature. You can always try the manuals where most questions should be answered from the manufacturer.
Learn more tips in our Choosing a Strong Password Guide. Picking a WiFi channel is not always a simple task. This may cause the router to stop functioning permanently. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.
Is this article up to date? Use an ethernet cable, and plug your computer into the router. This website uses cookies to improve your experience while you navigate through the website.
Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are as essential for the working of basic functionalities of the website.
0コメント